12 Pack PTFE 13mm Syringe Filter

The lab-grade filter that keeps your spawn clean

Cultivation work eventually requires moving fluid from one container to another — drawing LC into a syringe, transferring spore solution between jars, dispensing sterile water for sample preparation. Every transfer is an opportunity for contamination.

The standard solution is sterile technique with a sterile syringe and sterile destination. This works for most applications. But for cultivators doing high-volume LC work, multi-strain comparisons, or research-grade cultivation, adding an inline sterile filter dramatically reduces contamination risk during transfer.

The Colorado Cultures 12 Pack PTFE 13mm Syringe Filters are laboratory-grade sterile inline filters designed to attach to standard syringes. PTFE (polytetrafluoroethylene) is the chemical name for Teflon — the material that gives these filters their unique combination of sterility, hydrophobicity, and chemical resistance.

What syringe filters actually do

A syringe filter is a small disc-shaped device with a porous membrane that attaches to the end of a syringe. When you push fluid through the syringe, the fluid passes through the membrane while contaminants are caught.

For cultivation applications:

• Filter incoming air when drawing fluid (positive pressure airlock against airborne contamination)
• Filter outgoing fluid when injecting (removes any contaminants in the source fluid)
• Filter LC during transfer between vessels (extra sterility insurance)
• Filter sterile water preparation from non-sterile sources

The result: sterile transfers even from non-sterile starting materials, with confidence that the destination culture is protected.

Why PTFE (Teflon) specifically

PTFE is the premium material for sterile filters for several reasons:

Hydrophobic by nature

PTFE doesn't absorb water. This matters because:

• Liquid water passes through cleanly rather than soaking into the filter
• Dry sterile air can be filtered without water absorption changing the filter characteristics
• Filter doesn't degrade with repeated wet-dry cycles
• Wet filters dry quickly between uses

Chemical resistance

PTFE is one of the most chemically inert materials in industrial use:

• Compatible with virtually all cultivation chemicals — IPA, ethanol, sterile water, saline
• Stable across pH range that mycology uses
• No leaching of chemicals into the filtered fluid
• No degradation from sterilization (autoclavable)

Sterilization capability

PTFE filters can be:

• Pre-sterilized at factory (this product) — most common
• Re-sterilized via autoclave (if needed for repeated use)
• Treated with isopropyl alcohol for surface sanitation
• Stable across sterilization cycles without performance loss

For mycology applications, this combination of properties makes PTFE filters the lab standard for sterile transfer applications.

Why 13mm specifically

The 13mm diameter is the standard small-volume lab filter size — sized for:

• Compact form factor that fits in any sterile work area
• Low dead volume — minimal fluid wasted in the filter housing
• Compatible with standard syringes — luer-lock and luer-slip fittings
• Easy storage — small enough for compact lab supply cabinets

Larger filters (25mm, 50mm) are for higher-volume applications. Smaller (4mm) are for very specialized small-volume work. 13mm is the goldilocks size for typical mycology cultivation use.

What you can do with these filters

Spawn bag inoculation

Attach the filter to a syringe of LC or spore solution before injection. The filter:

• Catches any contamination that may have accumulated in the syringe during shipping or storage
• Provides additional contamination barrier at the moment of injection
• Allows higher-confidence inoculation of expensive spawn or substrate

Liquid culture transfer

When moving LC between vessels:

• Attach the filter to the syringe during transfer
• Both incoming air and outgoing fluid are filtered
• The destination LC is protected from any contamination in the transfer process

LC and spore syringe preparation

When preparing your own:

• Filter sterile water before adding to spore prints or LC medium
• Filter LC before final packaging
• Ensure starting materials are fully sterile

Multi-strain comparison work

For genetic comparison studies:

• Use a fresh filter for each strain to prevent cross-contamination
• Consistent filtration across all comparison conditions
• Reduces variable contamination effects that could confound results

Sterile water dispensing

For routine sterile water work:

• Filter water from non-sterile source through the filter into a sterile destination
• Inexpensive way to "sterilize" small volumes when full pressure-cooker sterilization isn't practical

Why a 12-pack format

Twelve filters reflects realistic cultivation use:

• 12 filters = 6-12 weeks of typical cultivation depending on session frequency
• Single-use per session for sterile-technique purity
• Bulk pricing vs. individual purchase
• Buffer stock for unexpected projects

For occasional cultivators, a 12-pack lasts several months. For active cultivators, the 12-pack is reordered every 1-2 months.

Who buys these

• High-volume cultivators doing frequent LC and spawn injection work
• Genetics testers and breeders running multi-strain comparison studies
• Researchers running controlled cultivation experiments
• Spore syringe preparers filtering during preparation
• Cultivators with previously-contaminated grows wanting extra contamination prevention
• Mycology educators demonstrating sterile-technique principles

What this is NOT

• Not a substitute for proper sterile technique. A filter is one component of clean technique — gloves, mask, surface sanitation, and proper workspace still matter.
• Not a fungicide or sterilization agent. Filters catch contaminants mechanically; they don't kill organisms. Contaminants are removed but the filter itself becomes a contamination source if reused.
• Not appropriate for high-pressure injection. Standard mycology injection pressure is fine; industrial high-pressure applications need specialized filters.
• Not autoclavable for reuse in this packaging. This product is single-use pre-sterilized; autoclavable PTFE filters exist but are different products.
• Not appropriate for filtering thick fluids. Heavy LC with abundant mycelium may clog the filter. For mycelium-rich samples, filter the supernatant rather than the entire LC.

What's included

• 12 individually-sealed sterile PTFE filters in a pack
• Each filter pre-sterilized at the manufacturer
• Compatible with standard syringes (luer-lock or luer-slip)
• 13mm diameter form factor

Why this matters for serious cultivation

The marginal cost of adding a filter to each injection is small (cents per use). The marginal benefit — reduced contamination across many cultures — is significant.

For cultivators doing 5-10 injections per week, the 12-pack supports about 2-3 weeks of work and the cost per injection is less than $0.50.

For one prevented contamination event (which saves the spawn, substrate, and time of the grow), the entire 12-pack is paid back.

This is the kind of low-cost, high-leverage equipment upgrade that distinguishes serious cultivation practice from casual hobbyist work.

Why "PTFE for both spawn AND liquid cultures/spore jars"

The product label specifically calls out compatibility with both spawn and liquid culture/spore jars — recognizing that mycology cultivators have multiple use cases:

For spawn injection

• Pre-filter inoculant before injecting into grain spawn bag
• Reduce contamination risk at the bag injection port

For LC propagation

• Filter LC between blank LC jars
• Filter sterile water for LC preparation

For spore jar work

• Filter spore solutions during preparation
• Filter sterile water for spore syringe filling

Each use case is supported by the same filter. Versatility across cultivation applications is part of what makes PTFE filters useful.

For cultivators wanting easy-to-use, reliable, lab-grade sterile transfer protection across multiple cultivation contexts, the 12-pack PTFE 13mm filters are the right standard supply.